"value":"This door is special, you must open the script in the OnFailToOpen an edit it to place the tagname for the key required to open this door. If you do it right, this door will auotmatically open if the PC has the key, otherwise it will tell them a specific key is needed to open the door.\r\n\r\nThis door automatically shuts and locks itself after a few seconds."
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":""
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"On the Advanced tab, replace <Place text here> with whatever information you wish to appear on the Map of an area."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"On the Advanced tab, replace <Place text here> with whatever information you wish to appear on the Map of an area."
}
},
{
"__struct_id":5,
"Comment":{
"type":"cexostring",
"value":"This is the default waypoint you may place to set a patrol path for a creature or NPC.\r\n1. Create the creature and either use its current Tag or fill in a new one.\r\n2. Place or make sure the WalkWayPoints() is within the body of the On Spawn script for the creature.\r\n3. Place a series of waypoints along the route you wish the creature to walk.\r\n4. Select all of the newly created waypoints and right click. Choose the Create Set option.\r\n5. The waypoint set will have a set name of \"WP_\" + NPC Tag. Thus if an NPC with the Tag \"Guard\" will have a waypoint set called \"WP_Guard\". Note that Tags are case sensitive."
